Parking host accessibility checklist: measure facts before using labels
An accessibility checklist for a parking host should describe measurable conditions, not decide what every driver can manage. The useful information is the complete route: road edge, bay width, gate clearance, surface, slope, steps, lighting, turning space, and distance to the relevant entrance.
Measure the narrowest point
Use a tape measure where it is safe and record the narrowest passage, the usable bay width, the gate opening, and any height or weight limit. Walk the route at the time the booking would occur and note shadows, traffic, puddles, temporary obstacles, and the place where a passenger must transfer. The wheelchair-access host guide explains how to write this without a medical claim.
Use neutral language: “one step at the gate”, “sloped paving”, or “turning space is limited”. Do not write “fully accessible” unless the whole route has been assessed against a specific need and the claim is appropriate. Ask a driver what information they need without asking for unnecessary medical details.
Keep the facts current
Recheck the approach after construction, snow, a broken light, a new lock, or a change in neighbouring access. Include a clear stop condition and a response path if the route is not as described. Protect private household details and never publish access codes in the listing.
Accessible supply grows through precision. A careful host makes a driver’s own decision easier by documenting the route, limits, and changes honestly.
Add the return route to the listing: lighting after dark, the surface between the car and pavement, the nearest gate width, and where a passenger can open a door safely. If a detail is unknown, say so plainly. A measured limitation is more useful than a broad label that the space cannot support.